UNI-T
UNI-T UT675A Car Battery Tester with Printer
UNI-T UT675A Car Battery Tester with Printer
HOT LINE 077-8620567 NANO ZONE TRADING
Couldn't load pickup availability
UNI-T UT675A Car Battery Tester with Printer in Sri Lanka
Battery, Cranking and Charging System Analyzer with Built-In Printer and USB Data Transfer
The UNI-T UT675A Car Battery Tester with Printer is a digital battery analyzer that tests a 12V starting battery and the cranking and charging system of 12V and 24V vehicles, then prints the result on the spot. Using four-terminal Kelvin conductance testing, it reports battery health (SOH), charge level (SOC), voltage, internal resistance and cold cranking amps (CCA) for flooded, AGM, GEL and EFB batteries from 3 to 250 Ah. It suits workshops that want a printed record to hand to customers or attach to a job card. Browse our full range of Car Battery Testers in Sri Lanka.
The UT675A adds a built-in printer, USB data transfer to a computer and a date and time setting to the same test functions as the UT673A. It weighs 413 g and has a 128 × 64 display with English and Chinese menus. A 3-roll supply of printing paper, a USB cable and a carrying bag are included. It needs no internal batteries because it is powered by the battery under test through its clips. It tests 12V batteries (7~16V) and does not test 6V or lithium batteries. 24V coverage applies to cranking and charging system tests, and the tester does not charge batteries. If you do not need printing, the UNI-T UT673A offers the same tests in a lighter, more compact body. Every unit ships with the manufacturer's calibration certificate and a one-year warranty.
Technical Specifications
- Battery Test
- 12V battery | 7~16V DC | Capacity range: 3~250 Ah
- Cranking and Charging System Test
- 12V/24V systems | 7~30V DC
- Battery Types
- Lead-acid, AGM flat-plate, AGM spiral, GEL and EFB
- Battery Standards and Range
- CCA 40~2000 | BCI 40~2000 | CA 40~2000 | MCA 40~2000 | JIS 26A17~245H52 | DIN 40~1400 | IEC 40~1400 | EN 40~2000 | SAE 40~2000 | Ah 3~250
- Test Method
- Conductance test with four-terminal Kelvin test leads
- Readings
- Battery status, SOH (battery life), SOC (remaining capacity), voltage, internal resistance and measured CCA
- Printing and Data Transfer
- Built-in printer for battery, cranking and charging test results | USB data transfer | Printer working voltage: 10~16V
- Protection
- Over-voltage protection, reverse connection protection and poor-contact prompt
- Display and Language
- 128 × 64 black and white lattice LCD | English and Chinese
- Power
- No internal batteries; powered by the battery under test through the clips
- Working Environment
- -20°C~50°C | Operating humidity: ≤90% below 35°C
- Size and Weight
- 95 × 47 × 183 mm (excluding leads) | 413 g
- Certification
- CE, FCC, UKCA
- Calibration and Warranty
- Manufacturer's calibration certificate included | 1-year warranty
Key Features
- Built-In Printer
- Prints the last battery, cranking or charging test result for customer reports and job records
- USB Data Transfer
- Exports the last test result to a computer using the supplied USB cable and UNI-T software
- Battery Health Test
- Shows SOH, SOC, voltage, internal resistance and CCA with a clear verdict: good, good but recharge, retest after charging, replace, or bad cell
- Cranking System Test
- Records starting voltage and cranking time; normal when above 9.6V on 12V or 19.2V on 24V systems
- Charging System Test
- Checks ripple and output voltage under load at 2500 RPM, and flags low output, high output, no output or a likely diode fault
- 10 Battery Standards
- Select CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE or Ah to match the rating printed on the battery
- Date and Time Setting
- Adjust the year, month, day, hour and minute so printed reports carry the correct timestamp
Applications
- Workshops that issue printed battery and charging system reports
- Starter and alternator fault diagnosis
- Dealership, pre-sale and fleet maintenance records
- Truck and commercial vehicle checks (12V batteries, 12V/24V system tests)
Package Includes
- 1 x UNI-T UT675A Battery Tester with printer
- 1 x USB cable
- 3 x Rolls of printing paper
- 1 x Carrying bag
- 1 x Manufacturer's calibration certificate
- 1 x User manual
Downloads
📄 Download UNI-T UT675A Data Sheet
📄 Download UNI-T UT675A User Manual
