SHAHE 5120-150 Inside Groove Caliper 22-150mm

SHAHE 5120-150 Inside Groove Caliper in Sri Lanka

Stainless Steel Digital Caliper for Inside Groove Measurement, 22–150 mm, 0.01 mm Resolution

The SHAHE 5120-150 Inside Groove Caliper is a stainless steel digital inside groove caliper for measuring the inside diameter of grooves in bores. It covers 22–150 mm, reads to 0.01 mm / 0.0005" and is accurate to ±0.03 mm. The minimum hole diameter is 22 mm, so the jaws must fit into a bore of at least that size. Browse our full range of Digital Calipers in Sri Lanka.

Choose this inside diameter digital caliper when your work involves internal grooves, such as seal or retaining ring grooves inside housings and sleeves. For smaller bores starting from 8 mm, see the SHAHE 5130-150 internal groove caliper. For grooves on the outside of a part, use the SHAHE 5121-150 outside groove caliper. The 5120-150 is IP54 rated, so it resists dust and light splashes but is not for immersion. It runs on a 3V CR2032 coin cell and switches off automatically when idle. Every unit ships with the manufacturer's calibration certificate, batteries included and a one-year warranty.

Technical Specifications

Model

SHAHE 5120-150

Type

Inside groove digital caliper

Measuring Range

22–150 mm

Minimum Hole Diameter

22 mm

Resolution

0.01 mm / 0.0005"

Accuracy

±0.03 mm

Units

mm / inch conversion

Material

Stainless steel

Protection Rating

IP54 (dust and splash protected)

Battery

3V CR2032 coin cell, included

Power Saving

Auto power-off

Calibration and Warranty

Manufacturer's calibration certificate included | 1-year warranty

Key Features

Inside Groove Measurement

Designed to measure the diameter of internal grooves that standard jaws cannot reach

22–150 mm Range

Suited to medium and larger bores, with a 22 mm minimum hole diameter

±0.03 mm Accuracy

The better accuracy of the two 150 mm inside groove models

0.01 mm / 0.0005" Resolution

Clear digital readout in metric and inch units

Stainless Steel Construction

A stainless steel caliper for regular workshop use

IP54 Protection

Resists dust and light splashes; not suitable for submersion

Zero Reset and Unit Switch

Zero the display and change between mm and inch as the job requires

Auto Power Off

Helps save battery life when the caliper is not in use

Applications

• Measuring internal grooves in bores, housings and sleeves
• Checking seal and retaining ring grooves inside machined parts
• Machining, quality control and in-process inspection
• Maintenance and repair work on mechanical components

Package Includes

• 1 x SHAHE 5120-150 Inside Groove Caliper
• 1 x CR2032 battery
• 1 x Manufacturer's calibration certificate

Downloads

📄 Download SHAHE 5120-150 Data Sheet