UNI-T UT219P AC Digital Power Clamp Meter (1000A, 3-Phase, Bluetooth)

UNI-T UT219P AC Digital Power Clamp Meter in Sri Lanka

Handheld 3-Phase Power and Harmonics Analyzer

The UNI-T UT219P AC Digital Power Clamp Meter is an intelligent, Bluetooth-enabled clamp designed for accurate power and harmonics measurement in electrical distribution systems. It combines the function of a digital ammeter and power meter, letting maintenance engineers and electricians in Sri Lanka measure AC voltage up to 1000V, AC current up to 1000A, active/reactive/apparent power up to 3000kW, power factor, phase angle, and harmonic distortion from a single handheld unit.

Discover our complete selection of Digital Clamp Meters – True RMS, power quality, and 3-phase clamp testers in Sri Lanka!

Featuring a wide 75mm clamp jaw for thick conductors, single-phase and 3-phase (3-wire/4-wire) measurement modes, phase sequence detection, and a dedicated Bluetooth app for real-time data logging and report generation, the UT219P streamlines power quality audits, electricity theft detection, and preventive maintenance on motors, UPS systems, and solar installations.

Technical Specifications

AC Voltage: 30.0V~999.9V (True RMS) | Range: 1000V | Frequency: 15Hz~1kHz | Accuracy: ±(0.7%+3) to ±(2.0%+5)

AC Current: 0.30A~1100A (True RMS) | Ranges: 60.00A / 600.0A / 1000A | Frequency: 15Hz~1kHz | Accuracy: ±(1.5%+3) to ±(2.5%+5)

Active Power: Up to 1000kW (1P) / 1732kW (3P3W) / 3000kW (3P4W) | Accuracy: ±(1.7%+5) best case

Apparent Power: Up to 1000kVA (1P) / 1732kVA (3P3W) / 3000kVA (3P4W) | Accuracy: ±(1.7%+5) best case

Reactive Power: Up to 1000kVAr (1P) / 1732kVAr (3P3W) / 3000kVAr (3P4W) | Accuracy: ±(2.0%+5) best case

Power Factor / Phase Angle: -1~1 | -180°~179.9° | Accuracy: ±3° to ±5°

Harmonic Analysis: Up to 40th order | THD %f and THD %r | Voltage & current harmonics

Jaw Opening: 75mm (max. conductor diameter) | Safety Rating: CAT III 1000V / CAT IV 600V | Protection: IP54

Key Features

Measurement Modes: Single-phase, 3-phase 3-wire (balanced/unbalanced), and 3-phase 4-wire (balanced/unbalanced) power measurement

Bluetooth Connectivity: Pairs with the UNI-T Smart Measurement app (iOS/Android) for real-time monitoring, data recording, and automatic report generation

Phase Sequence Detection: Identifies positive or negative phase rotation to prevent motors running in reverse

Electricity Theft Detection: Built-in electric energy accumulation mode to compare against a utility meter's actual reading

Display: Large LCD with simultaneous 4-value display, MAX/MIN/AVG capture, data hold, and high-voltage warning indication

Power: 3 x 1.5V AAA batteries (or rechargeable Ni-MH) with 15-minute auto power-off

Build: Drop-proof to 1m, sealed IP54 housing, ergonomic finger-guard design for safe field use

Applications

Power quality audits on UPS systems and industrial distribution panels

Power factor analysis to identify capacitive or inductive load imbalance

Harmonic distortion troubleshooting on power grids with nonlinear loads

Motor, pump, and generator efficiency testing for solar and wind power installations

Phase sequence verification before commissioning 3-phase motors

Package Includes

1 x UNI-T UT219P AC Digital Power Clamp Meter main unit

Test leads with alligator clips (red, black)

Test probes (red, black)

3 x 1.5V AAA batteries (installed)

Tool box / carrying case

English user manual

Downloads

📄 Download UNI-T UT219P Data Sheet
📄 Download UNI-T UT219P User Manual